#
# imx25 config
#
# Open On-Chip Debugger 0.3.1 (2010-01-18-14:21)
# Ubuntu 10.04 LTS - the Lucid Lynx
#

# Usage example
# openocd -f imx25-oocd-0-3-1.cfg
# telnet localhost 4444

telnet_port     4444
gdb_port        3333

interface ft2232
ft2232_layout oocdlink
ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "VPACLink"
#jtag_speed 1
jtag_khz 3000


#reset_config trst_and_srst srst_pulls_trst
reset_config trst_and_srst

if { [info exists CHIPNAME] } {
   set  _CHIPNAME $CHIPNAME
} else {
   set  _CHIPNAME imx25
}

if { [info exists ENDIAN] } {
   set  _ENDIAN $ENDIAN
} else {
   set  _ENDIAN little
}

if { [info exists SJCTAPID ] } {
   set _SJCTAPID $SJCTAPID
} else {
   set _SJCTAPID 0x1b900f0f
}
jtag newtap $_CHIPNAME sjc -irlen 4 -expected-id $_SJCTAPID
if { [info exists CPUTAPID ] } {
   set _CPUTAPID $CPUTAPID
} else {
   set _CPUTAPID 0x07926041
}
jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID

jtag newtap $_CHIPNAME whatchacallit -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id 0x0

if { [info exists SDMATAPID ] } {
   set _SDMATAPID $SDMATAPID
} else {
   set _SDMATAPID 0x0882301d
}
jtag newtap $_CHIPNAME sdma -irlen 5 -expected-id $_SDMATAPID

set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME